Make Your Old Bicycle Electric At Home, Follow This Process
Electric Cycle Making: You will find many electric bicycles in the market today. His range has also increased a lot. Their price is decided according to their range. There are also many such electric bicycles. Which gives a range of up to 50 kilometers in a single charge. Although such a cycle is going to be out of the budget of the common man. In such a situation, if you want, you can convert your old bicycle to electric at home.
Paddle in it. This cycle will run nonstop and it will not even discharge the battery. All you are going to need for this is a rechargeable battery and a DC motor. These two things are available in the market at very low prices. And the process of making a cycle is also very easy. You can convert your old bicycle to electric in just half an hour.
First of all you have to take a wood bigger than 24 volt dc gear motor. You will have to make 5 holes in this wood. These 5 holes will be at a distance of 1 inch from each other. In this, 3 holes will have to be made towards the top and 2 holes towards the bottom.
Read More - Bullet Train: Know How Much is Left, How Long Will The Work of The Bullet Train Be Ready?
Now stick the DC motor by applying glue on the wood and fit the motor well by putting the packing strip in the middle 3 holes. Now further make a hole in the lid of the cold drink and put the nut bolt in it from the inside. Put a bolt on the outside and pack it with glue.
Fix this nut on the DC motor. Keep in mind that the nut should not be loose. This cold drink can's cap is going to do the work of rotating the cycle wheel. Now apply glue to the wood of the motor at the bottom and fix it in the cycle from where the cold drink cap can rotate the wheel.
After fixing the motor, mount the battery on the carrier of the cycle. After this, connect the plus and minus points of the battery with the help of wires. Now connect this connected wire to the left side of the gear motor. Connect a new wire to the other end. After this, leave both the remaining wires together and connect it. After this, the second part of your wire will be saved, in which you will have to connect the switch. In this way your electric bicycle will be ready. After this, as soon as you press the switch, the wheel will start rotating on its own.
Follow Us on Google News - Click For Latest News